HANDHELD PHOTOGRAMMETRY ENVIRONMENT 

Capture in 

Minutes

Make it easier and safer for your teams to gather data in less time and with fewer resources.

The qCam is a handheld photogrammetric camera that pairs survey-quality GNSS and IMU positioning with an onboard AI processor, delivering high spatial resolution, fast processing, and simple setup in the field.

Camera


20 MP

270x150°
field of view

Up to
100 MP/sec

GNSS


Accuracy 3–5 cm

Precision <1 cm

PPK correction
(Auto base and upload base)

LED


Smart probe

Durable


IP67

Dust and water resistant

Designed and Assembled in San Diego, CA

Hard case | qCam Camera | iPhone 8SE

2 TB onboard storage encryption per capture

99 wh (TSA compliant) V-Mount 14.8V battery (lasts 4-5 hours in the field)

Custom XT60 cord | Ethernet to USB-C cable | Battery belt clip

qCam handheld photogrammetry camera on its orange hard case

Camera-based mobile mapping device with built-in survey-grade GNSS. 

Frequently Asked Questions

Where can I learn the qCam basics?

The Looq support site walks you through it. Get Started covers unboxing, setting up and completing your first captures, with a short getting started video. Using the qCam covers how to hold and move the qCam while you capture.

How do I get the best captures with the qCam?

Field Capture Do's and Don'ts covers proper capture for every site type, including what to avoid.

How long can one capture be?

Each capture can be up to 30 minutes. Split larger sites into several captures that overlap.

Do I need a local base station?

No. If you skip it, Looq uses the nearest suitable reference station. Uploading your own base station data is a good idea when you want the most reliable absolute accuracy.

Can the qCam capture overhead lines and manholes?

Yes. For pole lines, walk 3 to 5 meters beside the wires, never directly under them. For manholes and vaults, the LED strobes light the interior while you lower the qCam from above ground.